Roller lug bearings have several types of dismantling methods, people can dismantle according to their own needs.

First, knocking method, knocking method is very easy to operate, but it is very easy to destroy the equipment, with this kind of method, pay attention to the point of force must be accurate.

Second, hot dismantling method, the temperature in one hundred degrees of automobile oil irrigation in you need to dismantle the roller tank ear bearings, with bearings hot after the use of special tools to pull out the bearings, the basic principle of this way is thermal expansion cold acid.

Third, the push method, the application of the press, the dismantling of roller lug bearings in the case of this method can be trusted.

Fourth, drag out method, this type of method is also rely on the actual operation of specialized tools. The actual operation is very simple, if you turn the special rocker can be.

Roller lug bearing heat dismantling method: used to dismantle the tightly mating bearings. First will be heated to 100 ℃ above and below the automobile oil with oil drums poured in the bearing to be dismantled, to be bearing ring heat deformation, you can use the pulling tool will be pulled out of the bearing. Roller tank ear bearing push method: with the press to push the bearing, stable and reliable in the work, does not damage the equipment and bearing shielding machine room. Presses have manual type push pressure, foot-operated type or hydraulic type press push pressure.