Single-rope Vertical Shaft Cage

The products are widely used in coal, metallurgy, chemical industry, building materials, non-ferrous metal mines, and are sold all over the country.

K Type Reciprocating Coal Feeder, Vibrating Ore Drawer

TX Type Pin Gear Car Pusher

Single-rope Coal Hoisting Skip for Vertical Shaft and Metallurgical Tipping Skip

Car Dumper, High Position Car Dumper

Explosion-Proof Door for Vertical Air Shaft

ZL Type Car Stopper

YKC Type Hydraulic Station

Cages are generally used in the secondary shaft hoisting of mines for lifting personnel, gangue, equipment, materials and so on. For small and medium-sized mines, the cage can also be used in the mine's main shaft lifting, for lifting coal. Cage is one of the important equipment in mine hoisting. There are many types of cages, according to the number of lifting ropes can be divided into single-rope cages and multi-rope cages, according to the type of tank road can be divided into steel tank road cages, rope tank road cages, wooden tank road cages, etc., according to the type of passenger car, the number of layers of cages can be divided into 0.5t single single-deck single-car cage, 1t single-deck single-car cage, 1.5t single-deck single-car cage, 3t single-deck single-car cage, 1t single-deck double-car cage, 1t double-deck double-car cage, 1t double-deck double-car cage, 1t double-deck cage, 1t double-deck cage, 1t double-deck cage, 1t double-deck cage, 1t double-deck cage, and so on. double-truck cage, 1t double-deck four-truck cage, 1.5t double-deck double-truck cage, 1.5t double-deck four-truck cage and so on.

With the advancement of metal materials and other technologies, the processing of cages from the original single Q235 ordinary steel, steel, special high-strength steel, stainless steel, aluminum and other materials to reduce the weight of the cage, increase the strength of the cage, extend the service life of the cage, etc.; in recent years, the intelligent science and technology is booming, intelligent cages came into being, automation control, lighting, sound, wireless communication, video surveillance, etc. in the cage on the use of the cage. The use of automation control, lighting, sound, wireless communication, video monitoring, etc. on the cage greatly improves the comfort of the occupants, mine management is more convenient, and production efficiency is greatly improved.

Vertical shaft skip is the main lifting container for vertical shaft lifting coal, ore, gangue and other materials; there are many types of skips, according to the number of lifting wire rope can be divided into single-rope skips and multi-rope skips, commonly used multi-rope skips and four-rope and six-rope two kinds of; according to the type of mine skips are divided into coal lifting skips and metallurgical skips, metallurgical skips and flip-type, bottom-unloading type, side-unloading type and other types of skips; skips have high efficiency, easy to realize automation, easy to use and maintain, etc.; skips have high efficiency, The skip is characterized by high efficiency, easy to realize automation, and convenient use and maintenance.

With the progress of metal materials and other technologies, the processing of skips has also developed from a single ordinary steel into a mixture of ordinary steel, special high-strength steel, special wear-resistant steel, stainless steel, high-strength aluminum and other materials, which reduces the weight of the skip, increases the strength of the skip, and prolongs the service life of the skip, which not only reduces the cost of the enterprise but also improves the production efficiency of the enterprise.

Safety gates are used in the entrance of vertical cage shafts and in and out of the car end of each level of the shaft. It is mainly used to protect the personnel, and also has a certain hindering effect on the mine car; to prevent personnel and vehicles from entering the shaft and falling accidents, and is only allowed to be opened when the cage is in place. Safety regulations: the safety gate must be interlocked with the cage position and hoisting signal. If the cage is not in place, the safety gate cannot be opened; if the safety gate is not closed, only leveling and layer changing signals can be issued, but no driving signal can be issued.

The electric safety door is driven by electric actuator. After opening, it is rotating and leveling type, which does not affect the in and out of long materials. There is no need for hydraulic drive hydraulic station, oil pipe, etc., and it can be directly connected to the power supply.

Electric safety gate does not need hydraulic station, direct access to the power supply. Due to the flat opening, does not affect the entry and exit of long materials. The door is automatically self-locking after closing, and it is easy to realize locking with other equipments.

Our company is located in Xuzhou, a famous historical and cultural city in Jiangsu Province, Xuzhou is located at the junction of four provinces, Beijing-Shanghai Railway and Longhai two major trunk lines in this intersection, the territory of the highway in all directions, the transportation is convenient. The company is mainly engaged in the production of vertical shaft lifting single rope (multi-rope) cage, skip and other mining hoisting equipment, shaking table, blocker, trolley machine and other operating equipment, mining safety doors, auxiliary production of other industrial and mining equipment, products are sold to coal mines and metallurgical mines throughout the country. The company and the major coal mine design institutes and the China University of Mining and Technology has established a good relationship of cooperation and technical support provided by them.

Our service tenet:Survive on quality, develop on reputation, and aim at customer satisfaction! The company has established good technical cooperation relationship with major coal and metallurgical design institutes and China University of Mining and Technology, and develops new products according to the market demand.

After the signing of the contract and technical agreement, our company will set up a special project management organization to formulate the design, production, quality inspection, construction program, and coordinate the work of the research institute, marketing department, finance department, quality inspection department, factory and other departments, in order to ensure that the supply period.